3000k,90CRI
$96.69 EX GST
Flexible LED Sheets conform to curves and contours with cut points in two directions for easy customisation. Run multiple sheets on one power source with solderless connectors. 💡 Design Guide
2 in stock
| Price Break Qty | Discounted Price |
|---|---|
| 1 - 9 | $96.69 |
| 10 - 49 | $93.79 |
| 51 - 100 | $87.02 |
| 101 - 500 | $73.48 |
| 501 - 1000 | $67.68 |
LED Sheet
- Easily Shape Sheets Around Slopes and Curves
- Cuttable Sections for Custom Designs
- Plug and Play with Onboard Connectors
- High Density LED Array Eliminates Hot Spots
- Adhesive backing and Screws for Easy Installation
- Mono Colour, Tuneable White, RGBW are Available
- 5 Years Warranty
What are LED Sheets?
Flex LED Sheets, also called Flex LED Tiles, Flex LED Light Sheets, are thin, flexible sheets of LEDs that can be mounted in light boxes, panels, screen, or other backlighting applications. The Flex LED Sheets is thin and cuttable, can be cut to almost every shape, making them applicable to illuminating curved, sloped, or large objects. Intuitive, plug-and-play connections ensure reduced installation time and cost.
LED Sheet Light Applications
Flexible LED light sheets are thin, customizable sheets of LEDs that are perfect for various applications, including signage, backlighting, trade show, display, panel, and OEM. These customizable sheets can be cut in any direction along the printed cut lines, allowing you to cut them into the shape or length you need. They can also be folded over edges or wrapped around columns and other curved surfaces. The double-sided adhesive tape on the back allows easy installation with no tools needed. The sheet can also be mounted with screws or nails through the designated areas between each LED.
Specifications.: 420-LS2835W30-24V-Ra90-11W
- 420 Leds Per Sheet
- 3000K
- 24V
- Min 90 CRI
- 11 Watts
- Size: 503.5 * 235mm
Tools
Custom Sheet Calculator for Cost and Design
The calculator provides a cost based on a per sheet basis. It also provides a visual output of the sheet arrangement of your requested design size will look like. This is downloadable as a pdf file Please note sheets are cuttable in 16.8mm(Standard White), 16.7 x16.8mm (Tunable White), 23.5 x 25.2mm(RGBW)Squares and the calculator provides a design concept based on the squares. We do not not cut sheets, so the design is based on whole sheets but provides a visual of what and where cutting would be required to fit your design. Where the design is not a matching overlay you can mount with slight gaps to fit without any major visual issues ie shadowing, visual gaps. This is relative to the materials your back lighting(opacity, thickness etc) and distance from Sheet to diffusor.
Materials
Stone, Marble
| Stone Type | Thickness (mm) | Approx. Light Transmittance | Notes / Applications |
|---|---|---|---|
| White Onyx | 10 mm | 15–25% | Highly translucent; best stone for backlighting. |
| White Onyx | 20 mm | 5–12% | |
| White Onyx | 30 mm | <5% | Still glows when strongly backlit. |
| Honey Onyx | 10 mm | 10–20% | Warm amber glow under light. |
| Honey Onyx | 20 mm | 3–10% | |
| Green/Blue Onyx | 10 mm | 8–18% | Colour and veining impact transmittance. |
| Green/Blue Onyx | 20 mm | 3–8% | |
| White Marble (Carrara) | 10 mm | 2–5% | Mildly translucent; can glow under strong light. |
| White Marble (Carrara) | 20 mm | <2% | |
| Calacatta Marble | 10 mm | 1–3% | Luxurious but not ideal for backlighting. |
| Alabaster | 10 mm | 20–40% | Exceptionally translucent; great for decorative panels. |
| Alabaster | 20 mm | 10–25% | |
| Quartzite (e.g., Taj Mahal) | 20 mm | <3% | Slight glow in translucent regions. |
| Engineered Quartz | 20 mm | <1% | Fully opaque; not suitable for backlighting. |
| Granite | 20 mm | <1% | Very dense; blocks all visible light. |
| Translucent Resin Stone | 10 mm | 10–60% | Custom composite; designed for artistic lighting. |
Glass
| Glass Type | Approx. VLT (%) | Description / Notes |
|---|---|---|
| Clear Float Glass | 85–92% | Standard plain glass; high transparency, no tint. |
| Low Iron Glass (Optiwhite) | 89–91% | Ultra-clear glass with minimal green tint; high light transmission. |
| Frosted Glass | 70–85% | Sandblasted or acid-etched surface; diffuses light, obscures view. |
| Tinted Glass (Bronze, Grey, etc.) | 14–60% | Absorbs light to reduce glare and heat; VLT varies by tint and thickness. |
| Reflective Glass | 10–45% | Coated with metallic films; reflects visible light; commonly used in office buildings. |
| Laminated Glass | 80–90% (clear) | Two or more layers bonded with interlayer; slight reduction in VLT due to the interlayer. |
| Double Glazing (Clear) | 70–80% | Two panes with air/gas between; VLT reduced slightly compared to single-pane. |
| Low-E (Low Emissivity) Glass | 60–75% | Coated to reflect infrared heat; slightly reduced VLT due to coating. |
| Wired Glass | 75–85% | Embedded wire mesh; slightly reduces visibility and light transmission. |
| Patterned/Textured Glass | 50–80% | Decorative surface patterns scatter light; varies widely depending on pattern depth. |
| Sandblasted/Opaque Glass | 0–10% | Almost fully opaque; used for privacy or decorative applications. |
| Smart Glass (electrochromic) | 0–70% | Switchable glass that can adjust transparency; VLT depends on current state. |
| Spandrel Glass | <1% | Painted or coated back surface; completely opaque, used to hide structural elements. |
Plastic, Polymers
| Plastic / Polymer Type | Approx. VLT (%) | Description / Notes |
|---|---|---|
| Clear Acrylic (PMMA) | 92% | Excellent optical clarity; commonly used in signage, skylights, display cases. |
| Polycarbonate (Clear) | 88–90% | High impact resistance, slightly lower clarity than acrylic. |
| PETG (Clear) | 86–90% | Food-safe, easy to thermoform; good clarity. |
| Polystyrene (GPPS – Clear) | 85–88% | Brittle but clear; used in packaging and light diffusers. |
| PET (Clear Films) | 87–90% | Used in packaging films, face shields, and protective layers. |
| PVC (Clear Rigid/Soft) | 80–88% | Can yellow over time; used in clear curtains, displays, and panels. |
| Frosted Acrylic | 60–80% | Diffused surface; reduces glare and softens light. |
| Diffused Polycarbonate | 40–70% | Used in LED lighting; provides uniform light diffusion. |
| Translucent Polypropylene | 40–60% | Milky look; used in labware and light-duty diffusers. |
| HDPE (Natural) | 10–30% | Waxy and translucent; not suitable for high clarity needs. |
| PTFE (Teflon) | <5% | Opaque to visible light; allows IR transmission. |
| UHMWPE | <5% | Very opaque; high durability and abrasion resistance. |
| ABS (Natural/Light Colour) | <5% | Mostly opaque; used for functional or structural parts. |
| Coloured Plastics | Varies (0–70%) | Depends on resin and pigment; often used decoratively or in branding. |
Brand
Cutter
Be the first to review “420-LS2835W30-24V-Ra90-11W”
Related products
$73.53 EX GST
Price range: $120.98 through $121.70 EX GST
$107.52 EX GST
$71.57 EX GST
$141.75 EX GST
Reviews
There are no reviews yet.