The Cutter-155LIN3030E7-24CV Aluminium PCB is 155mm Long x 24mm Wide. It is designed to take 6 leds and is designed for Cree J series 3030 leds. This PCB was created developed for 24vdc for constant voltage lighting applications
24Volt Constant voltage with diode limiting.
Direct Thermal Path : Dielectric under the thermal pad of LED
The Cutter-155LIN3030E7-24CV module requires attention to mounting and cooling to ensure that the junction temperature of the LED is kept well below the maximum rating as specified in the LED documentation published by Led Manufacturers
For optimal cooling, we recommend that the module be mounted to a suitable finned heat sink (aluminium or copper) that is exposed to open air. The module can be mounted to a heat sink in various ways
Before fastening the module to the heat sink, ensure that the two mating surfaces are perfectly flat and clean in order to maximise heat transfer to the the sink.
The bottom of the LED MCPCB is electrically neutral, so it is not necessary to electrically isolate the base from the cooling surface.
Termination: The PCB has an edge Anode and Cathode pad so wire can be soldered to top pads, close to the board edge
|PCB TYPE||Linear PCB|
|PCB SIZE||155 mm x 024mm|
|BASE METAL TYPE||Aluminium|
|DIRECT THERMAL PATH||No|
|THERMAL CONDUCTIVITY||3 W/m.K|
|GLASS TRANSITION TEMP.||170 degree Celsius|
|COMPATIBLE LED||Cree J series 3030|