Description
The Cutter-80-SXP-Custom is a compact Linear light Engine, length 82 mm x width 20 mm
The Cutter-80-SXP-Custom is a full Aluminium PCB, 1.6mm thick to account for high power operation. The PCB is mounted with 3 leds in the 3.45mm square footprint so can accommodate Cree XP footprint along with many other leds.
This range is available with Cree XP footprint and can be ordered in
White XPG, XPG-2, XPG-3, XPE and XPE-2 in White and colours. You can select from the variations table the variant you would like.
Configuration
The board is wired in series so as a minimum you will need to drive these from following examples
Electrical Specifications
- UV/Violet/Mixed Wavelength 3.0 Volts 3 x 3.0V per led = 9-10 Volts max Drive current 700ma = 6-7watts
- Red/Deep Red, Infra Red, Far Red 2.4 Volts 3 x 2.4 V per led = 7.2 Volts max Drive current 1Amp = 7.2 watts
*Please ensure you check the led specifications before running the board
Drive current is limited only to the manufacturers rated Led drive characteristics and your ability to dissipate the heat generated by that specification.
The board comes complete with Wago 2060 series Dual pin solder-less connectors for ease of assembly and allows for the boards to be daisy chained. The led pitch is such that when daisy chained the pitch between leds remains consistent across joins
Optical Support
The board does have predrilled holes to suit the Carclo 104xx series
DIY OPTIONS
If you want to build your own you can purchase the components. you will need a hot plate capable of 210 Degree C and Solder Paste
Buy the MCPCB Buy LEDS Buy the connector
Reviews
There are no reviews yet.