The Cutter-XPE-290L-UV390 is a high power Led Light Engine using 6 pcs of the Semileds 390nm 3535 package led
Part Number of the led is C3535U-UNL1-A1G11H390. The PCB is aluminium and is 290mm long x 20mm Wide 2mm thick. The board is simple to use with the Wago Solderless connectors on each end for simple termination or daisy chaining strings
Forward Voltage: Nominal 18 Volts
Radiant Intensity:Nominal 1500mw @350 ma
The Semiled’s LEDs are pre-soldered to the Linear Shaped Metal Core PCB. The Linear aluminium base makes it easy to access the led’s via power pads or the solderless connectors and to use solder hook up wire to the LED requiring no tools. Fastening the LED assembly to a heat sink is simplified using either
- Pressure sensitive, double sided thermal tape.
- Glue down with Arctic Silver 2 part Epoxy, Arctic Alumina or Arctic Silver bear in mind the engine is not easily removed with this method
- Use Arctic Silver Compound and screw down with an self tapper through the 4 centre holes. The holes have safe zones to avoid over torquing and cutting into active or ground traces, however with metal core PCB, we recommend the use of soft washers under the screw head. Screw size is M4