Digital RGBW Addressable LED strip-60-5050 5V These come in 1 metre rolls
Description
60 leds per metre, individually-controllable LED pixels on a flexible PCB, leds come mounted with heavier trace flex PCB in white & Black version,
Digitally-addressable LED strip, allows you to address the color of each single LED’s red, green and blue component with 8-bit PWM precision (24-bit color per pixel),
The LEDs are controlled by shift-registers that are chained up and down the strip so you can shorten or lengthen the strip, Only 1 digital out pin is required to send data. The PWM is built into each LED-chip so once the colours are setup no further communication is required to the strip and it will continue control/PWM the LEDs for you,
The PCB, you can cut this simply with wire cutters, there are cut-lines every LED. Solder to the 0.1″ copper pads, you can also connect strips together to make them longer, but will require some math to work out your led vs driver capacity
Technical specs:
- 60 LEDs per meter
- Maximum 5V @ 60mA draw per LED (all LEDs on full brightness)
- 5VDC power requirement (do not exceed 6VDC) – no polarity protection!
- 1 integrated RGB LEDs per segment, individually controllable
- LED wavelengths: 630nm/530nm/475nm, white in cool, neutral, warm white
- Connector: 3-pin JST SM
- 34 watts per metre
- IP 20, if you require waterproof versions, just ask. Our advice is to not use silicon sleeve.
Features
- Strip Length: 1 Metre
- Strip Width: 12mm
- Strip Thickness: 2mm
- May ship with either WS2812B or SK6812-based LEDs. They are the same brightness, color and protocol
- Warranty: 3 years
Reviews
There are no reviews yet.