$1.00 EX GST
Aluminium MCPCB for Cree XPE, XPE-2, XPG1,2 and 3 leds, XTE and other led’s, Size: 20mm x1.66mm
183 in stock (can be backordered)
| Price Break Qty | Discounted Price |
|---|---|
| 1 - 9 | $1.00 |
| 10 - 49 | $0.95 |
| 51 - 100 | $0.87 |
| 101 - 500 | $0.75 |
| 501 - 1000 | $0.58 |
Description
This MCPCB-XP20-ASLPCB is a Solderless version of our normal Star PCB, it uses poke in wires meaning star width wiring is a simple matter of cutting wires to size. It is designed to take a single led and is designed for Cree XPE, XPE-2, XPG1,2 and 3 leds, and other led’s with the same base dimensions.
Thermal
Dielectric under the thermal pad of LED
The MCPCB-XP20-ASL module requires attention to mounting and cooling to ensure that the junction temperature of the LED is kept well below the maximum rating as specified in the LED documentation published by Led Manufacturers
For optimal cooling, we recommend that the module be mounted to a suitable finned heat sink (aluminium or copper) that is exposed to open air. The module can be mounted to a heat sink in various ways
- 20mm pressure sensitive, thermally conductive tape (Recommended)
- Arctic Alumina thermally conductive adhesive
- Thermal Compound: Requires the use of mechanical fasteners
Before fastening the module to the heat sink, ensure that the two mating surfaces are perfectly flat and clean in order to maximise heat transfer to the the sink.
The bottom of the LED MCPCB is electrically neutral, so it is not necessary to electrically isolate the base from the cooling surface.
Please note the use of Thermal Adhesives makes the PCB unlikely to be removed for servicing. Please consider this if removal of the board is desired as another TIM may be a better choice.
Optics Support
The board can be used with Ledil, Carclo, Khatod etc Optics or other optics compatible with this LED. The offset termination on this solderless board provides a wider choice of Optics as there is no foul risk on the PCB termination pads
Assembly Guide for Optics: Ledil have a good generic guide on assembly of Leds/Optics, adhesives etc. Download
Termination
The PCB has multiple pads so wire can be soldered to top pads. The board can be purchased with either AVX or Wago connectors to make the board truely solderless
Specifications
| PART # | MCPCB-XP20-ASL |
|---|---|
| PCB TECHNOLOGY | Aluminium |
| PCB TYPE | 20 mm Round PCB |
| PCB SIZE | 20mm x 28mm x 1.65mm |
| BASE METAL TYPE | Aluminium |
| FINISH THICKNESS | 0.065”(1.65mm) |
| DIRECT THERMAL PATH | YES |
| THERMAL CONDUCTIVITY | 3 W/m.K |
| SURFACE FINISH | ENIG |
| GLASS TRANSITION TEMP. | 170 degree Celsius |
| COMPATIBLE LED | Cree XPx, Nichia NVxx219, Cree XTE, 3535 3 pad leds |
| Weight | 0.05 kg |
|---|---|
| Dimensions | 20 × 28 × 1.6 mm |
| MCPCB Material | Aluminium |
| PCB by Led Type | Cree XPE/G/C, Cree XTE, Samsung LH351B, Samsung LH351C, Samsung LH351D, XHP35 |
| PCB Size | |
| Thermal Conductivity | |
| Total Led Quantity per PCB | |
| PCB Material | |
| PCB On Board Configuration | |
| PCB Solder Mask Colour |
Brand
Cutter
Be the first to review “MCPCB-XP20-ASL”
You may also like…
Related products
Reviews
There are no reviews yet.