Direct Thermal Path : Dielectric under the thermal pad of LED
The MCPCB-XP32QUAD-S PCB requires careful attention to mounting and cooling to ensure that the junction temperature of the LED is maintained below the maximum rating as specified in the LED documentation published by Led Manufacturers
For optimal cooling, we recommend that the PCB be mounted to a suitable finned heat sink (aluminium or copper) that is exposed to open air. The PCB can be mounted to a heat sink in various ways
- 32mm pressure sensitive, thermally conductive tape (Recommended)
- Arctic Alumina thermally conductive adhesive
- Thermal Compound: Requires the use of mechanical fasteners
Before fastening the PCB to a heat sink, ensure that the two mating surfaces are perfectly flat and clean in order to maximise heat transfer to the the sink.
The bottom of the LED MCPCB is electrically neutral, so it is not necessary to electrically isolate the base from the cooling surface.
**Please note the use of Thermal Adhesives makes the PCB unlikely to be removed for servicing. Please consider this if removal of the board is desired as another TIM may be a better choice.**
TPAD uses latest pillar design technology to minimise thermal resistance by eliminating the dielectric layer so that the LED thermal pad is soldered directly to the aluminium or copper base. This ensures the lowest possible LED junction temperature, resulting in increased LED life, light power output and overall reliability.
Features: 32mm Aluminium MCPCB for Cree XP/XT/XHP35/NVSx219
|PCB TYPE||32mm Round (Series) PCB|
|PCB SIZE||32mm x 1.65mm|
|BASE METAL TYPE||Aluminium|
|DIRECT THERMAL PATH||No|
|GLASS TRANSITION TEMP.||170 degree Celsius|
|COMPATIBLE LED||Cree XPG/XPE/XTE/XHP35|
The board can accept Ledil GT4 Series and other optics.Select from below for possible Optics Match