SLM160W-1.0-160-ZA
90-160 W, TRI-MODE DIMMING™ (TRIAC, ELV & 0-10 V), HIGH POWER, 1-100% DIMMING RANGE, 12 V / 100 MA AUXILIARY OUTPUT
Features:
- Compatible with TRIAC ( forward-phase or leading-edge), ELV (reverse-phase or trailing-edge), and 0-10 V dimmers
- 12 V/100 mA auxiliary output
- IP66-rated case with silicone-based potting
- 90°C maximum case hot spot temperature
- Protections: output open load, short-circuit (latch-off), and over-temperature with auto recovery
- Conducted and radiated EMI: Compliant with FCC CFR Title 47 Part 15 Class A at 120 Vac and 277 Vac
- Complies with ENERGY STAR® luminaire specification and DLC (DesignLight Consortium®) technical requirements
- Worldwide safety approvals
Datasheet
Notes
- T: Tri-mode dimming (1-100%), C: 1kV /2kV surge protection
- T: Tri-mode dimming (1-100%), A: 4kV/4kV surge protection
- X: No dimming, A: 4kV/4kV surge protection
- Z: 0-10V dimming only (1-100%), A: 4kV/4kV surge protection
- Forced air cooling or heatsink base plate (aluminum baseplate: 210mm x 200mm x 2mm) is required for total continuous power exceeding 120 W
All LED drivers provide an output to the LEDs; however, the auxiliary voltage line is an additional output to help support other devices that require power. The auxiliary supply is protected by the drivers surge protection, increasing the reliability of the controls device. Possible applications could be to drive a fan or a thermal sensor to measure driver temperature from a microcontroller I/O pin
Reviews
There are no reviews yet.