The Best Features
Designed and manufactured in Melbourne Australia. Scaleable System, High efficiency, Wide Spectrum Choice and termination options
The SSK-404 is our 2nd generation of fixed spectrum panel light. This new generation is based on a optimised ratio of white to monochromatic to balance efficacy with spectral performance. We have selected the High Efficiency 2835 led as the base white as it is the best white midpower currently available.
Low Profile & Penetration
The boards are very low profile. The board has both an option of top mounted Molex solder less termination or centre connector termination with no top connectors to further reduce its profile.
404 Leds on this small a surface area makes this a light that can truly penetrate the canopy
Wide & Full Spectrum
The balance of complete white choices matched with market leading monochromatics allow us to create boards that truly can be described as full spectrum lights. We will be adding PC Red to the range to push closer to 680nm for fuller photosytem I and II coverage.
Built for the DIYER
The board was conceived for the DIY builder. It has multiple test points on the board to test strings as well as single monchromatic leds for trouble shooting, fits to several prexisting heatsinks and can be mounted to 6mm flat aluminium plate.
It is designed as a 24Vdc system to allow for use with broadly available range of 24V led drivers
Key Operating Specifications
- Board Voltage: 24VDC Nominal
- Drive Current: Range from 3A to 6A
- Power: 72 to 150 watts
- 295mm x 180mm x 6mm
Key Performance Specifications
- Photon Efficacy; 2.95umol/j, exceeds 2.8umol/j at 140 watts+
- Lumens: exceeds 32000 lumens at 150 watts
- Wall Plate Eff: >75%
- PPFD and Par Map: TBA
Boards available in a wide colour selection.
Options to include
- 2700k to 6500k in 98 CRI
- Expanded Red range to include, 1800 kelvin, Phosphor converted Red(660nm)
- High efficiency mid power White 228 LPW
- 4umol/j + Reds
- Wide Monochromatic range 365-850nm
Drive Data(Examples below are white with 660 and 450nm)
All of our Led products are designed and built on site in Melbourne at our state of the art SMD production facility. This allows us to control all aspects of the design, its production and most importantly the quality of the product we ship to customers.
We designed this new board for speed of manufacture and a balanced mix of white to monochromatic that lifts efficacy without limiting spectral options. We can produce the board up to 97 CRI in standard 80 CRI higher efficacy mid power and monochromatic reds without the need to use lower efficacy 90 or 95 CRI chips.
The board is unique in its termination options. It can be made with the standard solder less surface mount connectors or a bayonet lock quick connector option mounted in the board centre, allows it to be used with IP rated connectors