SSK-550-R Kit
The SSK-550-R uses latest Cree HE in the highest flux bins available, along with XPG3 top bin Deep Red. This kit has 1088 pcs of the highest flux and lowest voltage bins, this in combination provides for absolute optimum Lumens per watt and highest wall plate efficiency.
High efficiency boards designed for DIY projects. Available in 3500K and 660nm
FEATURES
- 1088 pcs Cree HE best Bin Diodes and XPG-3 660nm, best bins available
- Solderless Wago Connectors rated 320V 9A
- Thermal Interface Material(TIM) or Thermal paste is not required for lower drive currents <1.4Amp, but recommended for higher drive currents. We provide TIM for the boards
- Dimensions Assembled: 740mm x 600mm
- Max current per board is dependent on heat sinking, it is possible to drive the boards to 3 Amp’s but would require a heatsink with TIM and designed for active airflows
- Kit form. Only requires Philips or Hex Screwdriver
Kit Contents
Check below for kit parts list
- 4 only SSK-272V1 PCB
- 4 only SSK-2 Series Heatsink to match, complete with M3 Screws for assembly to board, kit also includes TIM
- HLG-480H-C-2100B or A Meanwell 480 Watt Driver
- 0-10V dimmer to suit the Meanwell Driver
- Wago connectors, IP Power Connector and Cable with mains 3 pin plug(AUS)
- Hanger
- 6 pcs of 20mm TSLOT rails for hanging, complete with hardware for assembly
- Reference Builds
Dim from 75-500 Watts
Vegetative footprint 5 x 5, Based on 45-60cm(18-24inches) Height to canopy
Flower Footprint 4 x 4, Based on 45-60cm(18-24inches) Height to canopy
5 year warranty
SPECIFICATIONS
Power | 240-500 Watts |
Voltage Range | 90-277 VAC |
LED | 1088 pcs Cree HE and XPG3 660nm Deep Red |
Flowering Footprint | 4 X 4 |
Veg Footprint | 5 X 5 |
System Efficiency | 172 Lm/W |
System PPF Efficacy | 2.56 μmol/joule |
Total output | 1192.05 PPF |
Dimensions | 740mm x 660mm x 35mm |
Recommended Mounting Height | 18-24 inches |
Reviews
There are no reviews yet.