SSK-272-D Optisolis Kit
The SSK-272-D Optisolis Kit uses latest Nichia 757 Optisolis 3030 LED in the highest flux bins available. This kit has 544 pcs of the highest flux and lowest voltage bins, this in combination provides for optimum Lumens per watt and high wall plate efficiency, while providing an incredible spectrum range.
High efficiency boards designed for DIY projects. Available with 3000k,3500K, 4000k, 5000k 757 Optisolis and Cree XPG-3 Leds.
FEATURES
- 544 pcs Nichia 757 Optisolis best Bin Diodes available and Cree XPG-3
- Solderless Wago Connectors rated 320V 9A
- Thermal Interface Material(TIM) or Thermal paste is not required for lower drive currents <1.4Amp, but recommended for higher drive currents. We provide TIM for the boards
- Dimensions Assembled: 180mm x 600mm
- Max current per board is dependent on heat sinking, it is possible to drive the boards to 2.8 Amp’s
- Kit form. Only requires Philips Head Screwdriver
Kit Contents
Check below for kit parts list
- 2x SSK-272-D Optisolis Kit Solskin Boards (Nichia and Cree Diodes)
- 1x SSK-2X2 Double Predrilled 600mm Heatsink
- Meanwell ELG-240H LED Driver. 93.5% Driver Efficiency. Boards should be wired in series with the driver for maximum output. Will drive the board to 260 watts with the A Version
- 6FT Mains Power Cord.
- 2ft stranded Wire, 2x Wago Connectors for DC wiring
- Hanger Clips
SPECIFICATIONS
| Power | 260 Watts |
| Voltage Range | 90-277 VAC |
| LED | 544 pcs Nichia 757 Optisolis and Cree XPG-3 |
| Flowering Footprint | 2 X 4, 3 X 3 |
| Veg Footprint | 4 X 4 |
| System Efficiency | 152 Lm/W |
| System PPF Efficacy | >3 μmol/joule |
| PPFD @18Inches 3×3 | 1100 + PPFD centre, 300+ Outside edges |
| Dimensions | 645mm x 210mm |
| Recommended Mounting Height | 18-24 inches |
Reviews
There are no reviews yet.