$2.95 EX GST
Aluminium MCPCB for XP series, XT-E, 3535, 219. Series Configured. 87mm x 25mm x1.66mm
80 in stock (can be backordered)
| Price Break Qty | Discounted Price |
|---|---|
| 1 - 9 | $2.95 |
| 10 - 49 | $2.80 |
| 51 - 100 | $2.57 |
| 101 - 500 | $2.21 |
| 501 - 1000 | $1.71 |
MCPCB-XP8220TRIPLE-LIN: This Aluminium PCB is very flexible. It is designed to take 3 leds, with 3.45 × 3.45mm base, so will suit Cree XPG, XPG2, XPL, XHP35, Nichia NVSL219 and numerous other 3535 leds with the same base dimensions. The board layout is such that the 3 leds can be driven in
- Series
- Parallel for multiple boards
Non Direct Thermal Path : Dielectric under the thermal pad of LED
The MCPCB-XP8220TRIPLE-LIN module requires careful attention to mounting and cooling to ensure that the junction temperature of the LED is kept well below the maximum rating as specified in the LED documentation published by Led Manufacturers
For optimal cooling, we recommend that the module be mounted to a suitable finned heat sink (aluminium or copper) that is exposed to open air. The module can be mounted to a heat sink in various ways
- 82 x 20 mm pressure sensitive, thermally conductive tape (Recommended)
- Thermal Compound: Requires the use of mechanical fasteners
Before fastening the module to the heat sink, ensure that the two mating surfaces are perfectly flat and clean in order to maximise heat transfer to the the sink.
The board has pads to suit the Wago 2 way 2060 series solderless connector. Mechanical fasteners are recommended for this module.
The bottom of the LED MCPCB is electrically neutral, so it is not necessary to electrically isolate the base from the cooling surface.
Please note the use of Thermal Adhesives makes the PCB unlikely to be removed for servicing. Please consider this if removal of the board is desired as another TIM may be a better choice.
Optics Support: The board is predrilled for Carclo 10mm Optics optics.. It is also possible to use with other optics to 20mm diameter
Optics can be adhered to PCB with adhesive, however the PCB is drilled to match drill holes on the optic
Assembly Guide for Optics: Ledil have a good generic guide on assembly of Leds/Optics, adhesives etc. Download
Termination: The ends of the PCB of has Anode and Cathode pads. The PCB can be standalone or wired in groups in Series or parallel.
Specifications
| PART # | MCPCB-XP8220TRIPLE-LIN |
|---|---|
| PCB TECHNOLOGY | Aluminium |
| PCB TYPE | Non DTP Alum |
| PCB SIZE | 82mm x 20mm x 1.65mm |
| BASE METAL TYPE | Aluminium |
| FINISH THICKNESS | 0.065”(1.65mm) |
| DIRECT THERMAL PATH | No |
| THERMAL CONDUCTIVITY | 3 W/m.K |
| SURFACE FINISH | HASL |
| GLASS TRANSITION TEMP. | 170 degree Celsius |
| COMPATIBLE LED | Cree XPG, XPG2, XPL, XHP35, Nichia NVSL219 |
| Weight | 0.05 kg |
|---|---|
| Dimensions | 87 × 24 × 1.6 mm |
| MCPCB Material | Aluminium |
| PCB Size | |
| PCB by Led Type | |
| Thermal Conductivity | |
| Total Led Quantity per PCB | |
| PCB Material | |
| PCB On Board Configuration | |
| PCB Solder Mask Colour |
Brand
Cutter
Be the first to review “MCPCB-XP8220TRIPLE-LIN”
Related products
Reviews
There are no reviews yet.