$1.73 EX GST
Copper Star shaped MCPCB for Cree XEG(3), 20mm Diameter, 1.66mm Height. Direct Thermal Path
Allows for 3Amp operation
19 in stock
| Price Break Qty | Discounted Price |
|---|---|
| 1 - 9 | $1.73 |
| 10 - 49 | $1.64 |
| 51 - 100 | $1.51 |
| 101 - 500 | $1.30 |
| 501 - 1000 | $1.00 |
Description
MCPCB-XEG-TRI20-CU. This printed circuit board with Copper base has been developed for Cree XEG and allows you to quickly create your prototypes of LED modules based on Cree XEG Leds. With it’s high thermal conductivity of 390 W/mK with its direct thermal path, this printed circuit board is able to drain the heat of the LED components through the Copper base, which is ideal for LED lighting. This Metal Core PCB is manufactured with UL certified Copper substrates.
The MCPCB-XEG-TRI20-CU is designed to take three Cree XEG Led. The board layout is for 3 leds in either addressable or series configuration and can be load with resistors for current limiting on board for CV operation.
Thermal Design
No dielectric under the thermal pad of LED
The module requires careful attention to mounting and cooling to ensure that the junction temperature of the LED is kept well below the maximum rating as specified in the LED documentation published by Led Manufacturers
For optimal cooling, we recommend that the module be mounted to a suitable finned heat sink (aluminium or copper) that is exposed to open air. The module can be mounted to a heat sink in various ways
- 20mm pressure sensitive, thermally conductive tape (Recommended)
- Thermal Compound: Requires the use of mechanical fasteners
Optics Support:
The board is drilled to take specific Optics. Primarily 10507, 08, 09, 10, 11 series from Carclo and the Satu series from Ledil
Termination
The board has multiple pads in Cathode and anode to allow for wire clearance in multiple application
* some holders may require modifications to allow wire access to the PCB, Cutter assumes no responsibility for holder modifications
Specifications
| Part # | MCPCB-XEG-TRI20-CU |
|---|---|
| PCB Technology | Copper DTP |
| PCB type | 20 mm Star PCB |
| PCB Size | 20mm x 1.65mm |
| Base Metal type | Copper |
| Finish thickness | 0.065”(1.65mm) |
| Direct Thermal Path | Yes |
| Thermal Conductivity | 390 W/m.K |
| Surface Finish | ENIG |
| Glass Transition Temp. | 170 degree Celsius |
| Compatible LED | Cree XEG |
| Weight | 0.05 kg |
|---|---|
| Dimensions | 20 × 20 × 1.7 mm |
| MCPCB Material | Copper Direct Thermal Path |
| Led Type | Cree XEG |
| PCB Size | |
| PCB by Led Type | |
| Thermal Conductivity | |
| Total Led Quantity per PCB | |
| PCB Material | |
| PCB On Board Configuration | |
| PCB Solder Mask Colour |
Brand
Cutter
Be the first to review “MCPCB-XEG-TRI20-CU. Copper Base MCPCB for XEG LED’s with High Thermal Conductivity”
You may also like…
Related products
Reviews
There are no reviews yet.