CLU-02x-GP Graphite Pad is a precut/ pre moulded graphite thermal pad
This is precut for Citizen CLU026 and other COB with the same 13.5mm notched form factor, will work with Cree CMT14xx, CXX13xx.
Custom Pad design start as low as USD30
- Ultra-high thermal conductive performance / easy to operate
- Low thermal resistance
- Light weight
- Conductivity(vertical direction) 20 w/m-k
- Conductivity(horizontal direction) 800 w/m-k
Available thickness is 0.03~1.0 mm
Continuous use Temp -40~+400 Deg C
- Power conversion equipment
- Power supplies
- High Power Led TIM
Guidelines for Use
1. Pick up Graphite thermal pad from release film gently.
2. Make sure the surface of the substrate is clean and dried before apply theGraphite thermal pad.
3. Position the Graphite thermal pad to COB.
4. Apply some pressure to ensure good contact.
5. TheGraphite thermal pad can be applied and removed (care must be taken during installation to avoid tearing).
Size 13.5mm x 13.5mm x 0.5mm
Product dimension and packaging: Can provide customised dimension if required x Thickness range: 0.5 to 2.0mm