The Best Features
SSK-404-V1-Photophyll Select Horticultural White is Designed and manufactured in Melbourne Australia. Scaleable System, High efficiency, Wide Spectrum Choice and termination options
High Efficacy
The SSK-404-V1-Photophyll Select Horticultural White is our 2nd generation of fixed spectrum panel light. This new generation is based on a optimised ratio of white to monochromatic to balance efficacy with spectral performance. We have selected the High Efficiency 2835 led as the base white as it is the best white midpower currently available. The Photophyll Select is a low red phosphor that increases efficacy but not having to convert red. The Red is balanced by using high power Cree Deep Red or other selected options
Low Profile & Penetration
The boards are very low profile. The board has top mounted Molex solder Less connectors
404 Leds on this small a surface area makes this a light that can truly penetrate the canopy
Wide & Full Spectrum
The balance of complete white choices matched with market leading monochromatics allow us to create boards that truly can be described as full spectrum lights. We will be adding 680nm for fuller photosystem I and II coverage.
Built for the DIYER
The SSK-404-V1-Photophyll Select was conceived for the DIY builder. It has multiple test points on the board to test strings as well as single monchromatic leds for trouble shooting, fits to several pre-existing heatsinks and can be mounted to 6mm flat aluminium plate.
It is designed as a 24Vdc system to allow for use with broadly available range of 24V led drivers
Key Operating Specifications
- Board Voltage: 24VDC Nominal
- Drive Current: Range from 3A to 6A
- Power: 72 to 150 watts
- 295mm x 180mm x 6mm
Key Performance Specifications
- Photon Efficacy; 2.85umol/j, exceeds 2.8umol/j at 140 watts+
- Lumens: exceeds 32000 lumens at 150 watts
- Wall Plate Eff: >75%
- PPFD and Par Map: TBA
Additional Data
Boards available in a wide colour selection.
Options to include
- Horticultural White
- Expanded Red range includes Far Red and 680nm
- High efficiency mid power White 228 LPW
- 4umol/j + Reds
- Wide Monochromatic range 365-850nm
Drive Data(Examples below are white with 660 and 450nm)
PAR MAP/PPFD
Map demonstrates 2 x 404 boards in a .9x.58m Space powered at 315 watts with Mylar Wall surround
PAR MAP/PPFD
Map demonstrates 2 x 404 boards in a .9x.58m Space powered at 248 watts with Mylar Wall surround
PAR MAP/PPFD
Map demonstrates 2 x 404 boards in a .9x.58m Space powered at 412 watts with Mylar Wall surround
SSK-404 Manufacturing
All of our Led products are designed and built on site in Melbourne at our state of the art SMD production facility. This allows us to control all aspects of the design, its production and most importantly the quality of the product we ship to customers.
We designed this new board for speed of manufacture and a balanced mix of white to monochromatic that lifts efficacy without limiting spectral options. We can produce the board up to 97 CRI in standard 80 CRI higher efficacy mid power and monochromatic reds without the need to use lower efficacy 90 or 95 CRI chips.
The board is unique in its termination options. It can be made with the standard solder less surface mount connectors or a bayonet lock quick connector option mounted in the board centre, allows it to be used with IP rated connectors
Reviews
There are no reviews yet.